WoodSafe Exterior WFX
Fire rated timber solution - Exterior and Interior
Substrate | Timber
Surface Rating | Type A | BAL-29 | Group 1-S | Group 1
Substrate Thickness | Varies depending on timber species
Substrate Density | Various
WoodSafe Exterior WFX is an off site treatment with a certified Type A and BAL-29 rating for exterior cedar cladding and Group 1-S and Group 1 rating for use outdoors and interior wet areas.
Characteristics:
-
The only Type A exterior fire rated timber cladding available.
-
Fire rated impregnation system.
-
Environmentally friendly with zero halogens.
-
Simple off-site treatment.
-
Invisible to the eye, no VOC.
Advantages:
-
Applied to natural timber.
-
Timber can be stained any decorative colour or oiled.
-
Treated timber delivered to site ready to install.
-
Not an ammonium sulphate system, no leaching, no white residue.
At A Glance
Type |
Fire-rated polymeric impregnation system. |
Fire Protection |
Type A / BAL 29 / Group 1-S /Group 1. |
Timber Species |
Cedar |
VOC |
Zero grams/litre |
Environmental |
Zero Halogens |
Install Location |
Interior C1 - C2 |
Specifications:
Masterspec section 4221FW or contact Fireshield direct for assistance.
Compliance:
-
Tested to C/AS2 Appendix C, C7.1 : achieving Type A compliance with C/AS2 NZBC External Fire Spread.
-
Fulfils the requirements according to AS 3959:2018, Appendix F, point F2 Testing, as a “Bushfire-resisting Timber”. The product is deemed to be acceptable to withstand exposure up to a BAL-29 condition.
-
Group 1-S solution in New Zealand fully compliant with the New Zealand Building Code Clause 3.4(a) complying with C/AS2-C/AS6.
-
Group 1 solution in Australia fully compliant with the National Construction Code 2019 Amendment 1, C1.10 for Class 2-9 Buildings.
For more details about installation, environmental conditions and timber substrates go to the Technical or Applicators Portal.
Related Products:
Click on the image to go to the page