TimberOne Top Coat

Top Coat for TimberOne

NZ Specifications
for TimberOne Top Coat

TDS TimberOne Top Coat plus
MSDS TimberOne Top Coat plus

Australia Specifications
for TimberOne Top Coat

Specifications will be loaded shortly
Substrate | Light Coloured Interior Timber
Surface Rating | Group 1-S / Aus Coming Soon
Substrate Thickness | > 8mm for Group ratings
Substrate Density | > 338kg/m³ for Group ratings

Fireshield® TimberOne Top Coat is a waterborne sealer coat for the TimberOne intumescent in environments where the relative humidity is constantly >75% or when a wipeable surface is required.


Characteristics:
  • Simple two coat fully waterborne system: basecoat and top coat
  • Thin film technology, quality finish.
  • Environmentally friendly with zero halogens.
  • Simple on-site application.
  • Low odour, low VOC.

Advantages:
  • Applied to natural timber as thin as 8mm.
  • Specifically designed for light-coloured timbers such as pine and CLT,
  • Lessens the yellowing effect of light-coloured timbers.
  • Simple waterborne two-coat system.

 

At A Glance  
Type
Waterborne matt finish top coat. 
Fire Protection
Group 1-S when used with TimberOne basecoat
Volume Solids
63% by volume
TVOC                           
  
Environmental         
Zero Halogens
Install Location
Interior Dry Areas
   
 
Specifications:
Masterspec section 6743FS or contact Fireshield direct for assistance.

 

Compliance:
  • Group 1-S solution in New Zealand compliant with the New Zealand Building Code Clause 3.4(a) complying with C/AS2-C/AS6.
  • Coming soon to Australia.

 

For more details about installation, environmental conditions and timber substrates go to the Technical or Applicators Portal.

 

Related Products:

 Click on the image to go to the page

 


Specify and Order TimberOne Top Coat Online