TimberClear

Clear fire rated coating system for natural timber.
Substrate | Interior Timber
Surface Rating | Group 1-S / Group 1/ 30-60 mins FRR
Substrate Thickness | > 8mm for Group ratings
Substrate Density | > 338kg/m³ for Group ratings

Fireshield® TimberClear is a waterborne intumescent basecoat for the protection of interior timber surfaces to Group 1-S/Group 1 and structural timber members up to 60 minutes FRR from cellulosic fires in interior dry environments. It must be used with TimberClear Top Coat as part of the full system.


Characteristics:
  • Thin film technology, quality clear finish.
  • Environmentally friendly with zero halogens.
  • Simple on-site application.
  • Low odour, low VOC.

Advantages:
  • Applied to natural timber as thin as 8mm.
  • Timber can be stained any decorative colour before the TimberClear application.
  • Simple two-coat system for most ratings.
  • Can be used for 30 and 60 mins FRR on structural timber.

 

At A Glance  
Type
Waterborne intumescent basecoat
Fire Protection
Group 1-S /Group 1 up to 60 minutes FRR
Volume Solids
65% by volume
VOC                           
40 grams/litre
Environmental         
Zero Halogens
Install Location
Interior Dry Areas
   
 
Specifications:
Masterspec section 6743FS or contact Fireshield direct for assistance.

 

Compliance:
  • Group 1-S solution in New Zealand compliant with the New Zealand Building Code Clause 3.4(a) complying with C/AS2-C/AS6.
  • Group 1 solution in Australia compliant with the National Construction Code 2022, C1P4 for Class 2-9 Buildings using Codemark CM-30071.

 

For more details about installation, environmental conditions and timber substrates go to the Technical or Applicators Portal.

 

Related Products:

 

  Click on the image to go to the page

 


Specify and Order TimberClear Online